HZXXS02 Dual Table Inspection Machine: Specs & Guide

What This Machine Does If you inspect O-rings, P-rings or flat seals where both faces carry sealing surfaces, a dual table machine checks both sides in one pass - no manual flipping and no second station.

Key Specifications at a Glance Model: HZXXS02. Machine size: 3173 x 2843 x 2318 mm (main unit 1300 x 2350 x 2318 mm). Inspection targets: O-rings, P-rings, T-rings, rectangular rings, sealing rings, oil seals, flat washers, rubber miscellaneous parts. Dimension range: OD 6-120 mm, thickness 1.2-10 mm (customizable per size range). Camera configuration: 3-32 cameras for full appearance and dimensional inspection. Dimensional checks: ID, OD, wire diameter (add one camera for thickness). Visual checks: Short shots, pits, blocked holes, cracks, damage, burrs, mold residue, flow marks, impurities, scratches and dents. Glass turntable: 800 mm (larger customizable). Repeatability: +/- 0.01 mm. All specifications above come from the Shengyi New Material (Huzhou) Co., Ltd. machine brochure and are confirmed per configuration at quotation.

When Not to Choose This Machine Not for parts outside OD 6-120 mm / thickness 1.2-10 mm on the dual table side, or for fragile parts that cannot ride a turntable.

How It Fits Your Production Line Compared with the non-flipping single table HZXX-JC03 and the HZXX-JC01 standard model, the HZXXS02 is the two-sided-in-one-pass option for seal families.

Frequently Asked Questions How does the machine inspect both sides? Dual turntables pass each part through two inspection stations so both faces are imaged in one pass. How many cameras do I need? 3-32 cameras depending on defect types, part geometry and required speed; a typical seal line uses fewer cameras than a full-appearance line. What throughput can I expect? 80-840 pieces per minute depending on part size and camera count; smaller parts run faster.

Next Step Send 50-100 mixed samples of your seal family and the defect list you must catch. We run them on an HZXXS02 and return the inspection images and OK/NG log before you commit.